Low maintenance, weather-ready, and built to last decades. Hundreds of styles and colors to match your home's character.
Get a Free Vinyl Estimate: +1-844-782-0929
Our crews install vinyl every week. That repetition builds genuine skill -- tighter joints, proper expansion gaps, and correct fastener technique that holds up season after season.
Choosing vinyl siding involves more than picking a color. We discuss profile style, panel width, trim coordination, and how different finishes photograph in natural light on your home.
Vinyl siding needs room to expand and contract with temperature changes. Incorrect nailing tension or missed expansion gaps cause waves, buckling, and panel pop-out. We install to manufacturer specifications on every project.
Every vinyl siding project we complete in Old Hickory includes a written workmanship warranty alongside the manufacturer product warranty. You have coverage on both the materials and the installation labor.
From the initial substrate check through final trim detail, our installation crews handle every step. Clean, precise, and built to last through Old Hickory, TN's seasonal shifts.
We remove and properly dispose of existing siding, inspect the substrate for moisture or rot before covering it, and install new vinyl to manufacturer specs. Your home gets a fresh exterior backed by a full warranty.
The foam layer in insulated vinyl also eliminates the hollow sound conventional siding produces when struck, and it reduces thermal bridging through the wall studs -- a meaningful upgrade in colder climates.
We install vinyl shake on full elevations and as accent panels alongside horizontal lap siding. Proper alignment and starter strip placement keep the staggered courses looking intentional, not ragged.
Vertical installation requires different technique than horizontal lap. Expansion allowances run differently, and water management at the top edge demands precise flashing detail. Our crews have the experience to get it right.
Coordinated vinyl soffit and fascia complete the siding system and protect your roofline from moisture intrusion. We match profiles and colors to your siding for a finished, continuous look on every elevation.
Standard grade vinyl (typically .040" thick) is adequate for mild conditions and budget-conscious projects. Premium grades (.044" and above) hold shape better in temperature extremes common to Old Hickory, TN and resist denting from impact more effectively. We specify grade based on your home's exposure, not upsell pressure.
Thickness is measured in thousandths of an inch (mils or gauge). Thicker panels feel more solid, flex less in wind, and generally carry longer fade warranties. We provide thickness comparisons from the brands we carry so you can make an informed choice.
Insulated vinyl costs more upfront but reduces heating and cooling load, eliminates panel flex noise, and adds perceived quality. For Old Hickory homeowners dealing with significant temperature swings, the energy offset can narrow the price gap over a decade of ownership.
We stock impact-rated options and recommend them for exposed elevations. Manufacturer documentation on impact ratings is available on request -- you should know what you are installing before work begins.
Our estimator documents the scope, identifies any substrate issues that need addressing, and gives you a quote you can actually plan around -- no ranges, no surprises.
Once you approve the estimate, we finalize your style and color selection using physical samples on your home, then place the material order. Lead times are confirmed before your install date is scheduled.
Our crew prepares the substrate, installs starter strips and corner posts to spec, and works systematically across each elevation. Every panel goes on at the correct tension, with proper overlap and expansion allowances.
Your sign-off comes only when you are satisfied. We resolve any punch-list items before leaving the site and leave you with a clear record of what was installed and what is covered.
Vinyl siding is manufactured from polyvinyl chloride (PVC) resin compounded with stabilizers, pigments, and impact modifiers. The resulting panels are extruded at consistent thickness, then embossed with surface textures that mimic wood grain, cedar shake, or smooth lap board. Because the color runs through the full thickness of the panel rather than sitting as a surface coat, minor scratches and scuffs do not expose an underlying substrate. This characteristic distinguishes vinyl from painted wood or fiber cement and contributes directly to its maintenance advantage.
The physical behavior of vinyl in Old Hickory, TN's climate is the central installation challenge. PVC expands considerably with temperature increases and contracts in cold. Panels installed on a mild spring day will be in a different dimensional state than the same panels on a July afternoon or a January morning. A professional crew nails into the center of the elongated nail slots so each panel floats freely within the designed tolerance. Driving nails tight -- even one or two per panel -- creates a fixed point around which thermal stress concentrates, producing the waves and buckles homeowners associate with cheap installation. The material itself is not cheap; the technique was.
Vinyl siding grades are measured primarily by panel thickness, expressed in thousandths of an inch. Products at the lower end of the market measure around .040 inches. Premium lines reach .044 to .050 inches or more. Thicker panels carry greater impact resistance, flex less in high winds, and maintain a flatter profile over long spans between studs. They also tend to carry more favorable fade warranties from manufacturers, because the pigment loading in premium grades is formulated for longer color stability under UV exposure. For most standard residential applications in Old Hickory, a mid-range to premium thickness is a reasonable specification. Budget-grade panels are appropriate for low-exposure applications like enclosed porches or garage elevations with minimal sun and wind exposure.
Insulated vinyl is worth serious consideration for Old Hickory homeowners who prioritize energy performance or who have noticed that their existing siding is thin and responsive to wind pressure. The foam backing does not dramatically transform a wall's R-value on its own, but it adds continuous insulation that breaks the thermal bridging through wall framing -- a real improvement over cavity insulation alone. The cost premium is real, and the payback period depends on your energy rates and climate exposure in Old Hickory, TN. We give honest comparisons and let you decide.
Beyond occasional washing, vinyl siding in Old Hickory, Old Hickory, TN asks very little of the homeowner. Do not use harsh solvents, abrasive compounds, or undiluted bleach on vinyl panels -- these can affect the surface finish permanently. For mildew on north-facing elevations, a soft brush with a diluted cleaner and a rinse works reliably. When you notice caulking at trim joints beginning to crack or pull away from the surface, that is the time to call for a caulk refresh before water finds its way behind the trim. Attending to caulk maintenance is the main annual task vinyl siding places on a homeowner, and it is a minor one.
Professionally installed vinyl siding in Old Hickory, TN has a service life routinely measured in decades. Most manufacturer warranties run thirty to forty years on the product itself, with fade warranties covering a shorter window depending on color depth and grade. Dark colors absorb more heat and can fade somewhat faster than lighter neutrals. Professional installation from a licensed, insured contractor protects both the product warranty and your broader investment in the exterior. Homeowners who hire unlicensed crews often find that improper installation voids manufacturer warranties and leaves them without workmanship coverage when problems emerge. At SOS Roofing and Siding, both warranties -- product and workmanship -- are provided in writing before your project begins, so your protection is clear and documented from day one.
"We got quotes from four contractors. SOS Roofing and Siding was the only one who brought actual samples to our house so we could see the colors against our trim and roof in real light. That alone told us they knew what they were doing. The installation was flawless."
"The crew upgraded us to insulated vinyl after showing us the cost difference and what it would do for our north-facing wall. Best decision we made on the whole project."
"The old vinyl on our house was bubbling and wavy -- classic bad installation from whoever put it on years ago. SOS Roofing and Siding removed it, found some moisture damage on the sheathing underneath, fixed it before putting new vinyl on, and documented everything. That kind of transparency is rare."
"Crew showed up on time every day, cleaned up every evening, and finished ahead of the original schedule. The soffit and fascia match the siding perfectly. The whole exterior transformation has our neighbors asking who we used."
